Recharging was very fast and took me by surprise as I hadn’t read up the specs.It charges at 2 Amps using a regular USB-C charger but up to 3 Amps using a fast charger, and VooPoo’s ’18 minute’ claim appeared pretty accurate but mostly less as I tend to recharge from the first low warning. Pros What I did notice was that while auto drawing the LED’s always illuminate to 4 bars. So it’s not an indication of current battery strength. To figure that out you’ll need to remove the pod and re insert it. Which vape juice is best to use? The Argus P1 is perfect for use with Nic Salts or 50/50 E-Liquids. An adjustable slider has been incorporated into the side of the device. This should provide a degree of airflow flexibility when switching between either of the two included pods. The draw was smooth with no gurgling and the throat hit, even though I was vaping 6mg freebase nicotine, was very good. For those of you that prefer a stronger hit, I would recommend switching to a higher strength nic salt based e-liquid.

How long does the Argus P1 last? The device's longevity depends on usage, but with its 800mAh battery, vapers can expect extended vaping sessions. The only con is far from a deal-breaker and you get used to how long the battery lasts, I tend to top-up charge my stuff so it doesn’t matter for me. Final Thoughts When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment. Complete Guide to Vape Kits - Our in-depth guide covers everything you need to know about vape kits.

small airflow holes at its base, directing the air towards the bottom of the installed coil and upwards. The VOOPOO Argus P1 comes with two pods, one with a 0.7ohm resistance and the other with a 1.2ohm resistance. As the P1 uses the Argus series of pods, it should be compatible with any other pod from the same range, allowing you to use them interchangeably. Additionally, you can buy Argus pods with the coil built-in or empty ones that utilise replaceable coils - this appeals to all types of users as it gives you the leeway to customise your personal vaping experience. The pod still features the same smooth airflow passage and leak protection, the filling bung is a little different as it is edge mounted but still takes most standard bottle tips including shortfill nibs. I tested both pods with 50/50 20-24 mg nic salt juices. I started with the 0.7-ohm pod, and for coil life, I got around 12 mL. The average on a device like this is between 10-15 mL, so this fall right around the standards. The flavor was great for a pod system though. I got 20 mL out of the 1.2-ohm pod, which is above the category average. Flavor was at a similar level.

Still, this means that the Argus P1 tailors the power output of each individual puff to better suit the user’s draw (mine is a tight MTL, which explains the lower power output), which is excellent. I really love this feature, even though I found the signals from the lights a bit confusing. This preserves battery and, among other things, ensures you’re getting the perfect inhale every time. A variable output wattage is achieved by sensing the intensity of your draw and provides a fast responsive fire speed. The on board Gene chip also controls the included safety features and provides the visual indications via the 4 LED’s as follows: Introduction Introducing the VooPoo Argus P1 Pod Kit, a fusion of futuristic design and cutting-edge technology. This device, brought to you by the renowned VooPoo brand, promises an unparalleled vaping experience tailored to both beginners and seasoned vapers. Key Features The VooPoo Argus P1 vape kit is a compact option designed with ease of use in mind. Powered by a built-in 800mAh battery, this kit delivers a 20W maximum power output, which is ideal for MTL (Mouth To Lung) vaping. Thanks to USB-C fast charging, it can reach a full charge in just 18 minutes, so that you can spend more time vaping. The Argus P1 comes complete with two refillable pods that have built-in mesh coils to help get you started.

What do I need to know about storing lithium batteries safely?

With the new release of the critically-acclaimed Argus P1 kit, we’ve taken the liberty of composing a blog post about the product in question that takes a closer look at some of the device’s main attributes and performance. Keep reading if you want to know more about the VOOPOO Argus P1 kit and whether it’s the right fit for you! Contents I managed just over six and a half hours use from a single charge. During this time I was alternating between pods. For an 800mAh integrated battery I’d say that’s about average. Rapid Charging: Equipped with Type-C charging, the device supports 15W PD lightning charging, reaching a full charge in just 18 minutes. Also there are 4 cleverly concealed LED’s visible through this transparent casing that provide the UI indications and illuminate when you insert or remove the pod showing the battery status, illuminate while drawing on the pod and charging the Argus P1 or it’s displaying the different levels of protection.

When the pod is inserted or removed from the P1 body, the LED’s will light briefly. The number of LED’s that show depends on the remaining charge left in the battery. Voopoo Argus P1 Functionality Never use a battery that has been clearly damaged or is leaking. It should be discarded immediately in an appropriate way. Here at Vape Shop, the safety of our customers is a primary concern for us and we want to ensure that you have an accident-free vaping experience. As the world of vaping continues to develop and expand, it’s becoming more and more imperative that vapers are aware of the safety issues surrounding e-cigarettes. Although vaping is not a dangerous activity, there are some rules of safety that must be adhered to. The main safety hazard within an e-cig comes from the battery, so we have compiled this guide to ensure that you stay safe whilst using any of our products containing batteries. Please take a look at our battery safety guide here. About Lithium Ion Batteries Pull open the flap and insert your e-liquid bottle tip into the opening. Tilt the pod on its side to aid filling and to get the maximum amount of e-liquid into the pod. Once filled, re-insert the silicon rubber flap making sure the fill port is securely re-seated. A third of the casing is transparent so the internal circuit boards can be seen through the smoked tinted PCTG material which is identical to the color and material of the replaceable pods. Through the transparent casing on the side of the device is a UI display in the form of 4 rectangular LED’s, which are slightly obscured by the lanyard hook, showing the status of the battery during use and charging, together with any safety notifications.

Nic Salt vs. 50/50 E-Liquids - A detailed break down of the differences between freebase and nic salt E-Liquids.