How do I configure the wireless settings on the Powerline Extender if there is no WPS button on my router? 09-14-2017 612267 How to log into the web-based management interface of Powerline ac Extender (new logo) 06-28-2022 226826 Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. How to add an extra powerline adapter to the existing powerline network with pair button 06-29-2022 487153 The terms “AV1000” and “1000Mbps” are derived from applicable specifications and refer to the theoretical maximum physical-layer data transfer rate. Those terms are used on this product solely to indicate its compatibility with other “AV1000” or “1000Mbps” powerline devices. Actual data speeds vary and may be limited by the product’s Ethernet port and other network conditions such as data traffic, electrical noise, and wiring issues.For better performance, powerline devices should be deployed on the same electrical circuit and rated for the same HomePlug standard. A minimum of two powerline devices are required to establish a powerline connection. If you are uncertain about your network conditions, you should consult an IT professional to assist in selecting a networking product.

A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To UpgradeCompatibel met alle Powerline-adapters met de HomePlug AV- en AV2-standaard. Dit product is mogelijk niet compatibel met routers of gateways met firmware die is gewijzigd, is gebaseerd op opensourceprogramma's, niet-standaard of verouderd is. Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL) Kompatibilní se všemi adaptéry Powerline standardu HomePlug AV a AV2. Tento výrobek nemusí být kompatibilní s routery nebo bránami, jejichž firmware byl pozměněn nebo je založen na softwaru typu „open source“ a nebo je nestandardní či zastaralý.

How to customize Powerline ac Extender's wireless settings via web-based management interface (new logo) 06-28-2022 152033 What can I do if my client can’t roam between my wireless router and TP-Link AP & Range Extender product? 07-20-2021 247671

Rozšiřte kabelovou a bezdrátovou síť pomocí existující elektroinstalace.

How to add another powerline adapter to the existing powerline network with pair button 06-27-2022 276929 To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. Maximale draadloze signaalfrequentie op basis van specificaties van de IEEE 802.11-standaard. De werkelijke draadloze gegevensdoorvoer en het draadloos bereik kunnen niet gegarandeerd worden en variëren op basis van 1) omgevingsfactoren, met inbegrip van bouwmaterialen, fysieke objecten en obstakels, 2) netwerkomstandigheden, met inbegrip van lokale interferentie, omvang en dichtheid van het verkeer, locatie van het product, complexiteit van het netwerk en overhead, en 3) clientbeperkingen, met inbegrip van nominaal vermogen, locatie, verbinding, kwaliteit en toestand van de client.

Compatible with all HomePlug AV and AV2 Standard Powerline adapters. This product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or are non-standard or outdated. How to update the firmware of Powerline ac Extender via web-based management interface 06-28-2022 47897 How to update the firmware of Powerline ac Extender via web-based management interface (new logo) 06-28-2022 53294It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.