vuba EASIHOLD ROCKS - 5L XL Gravel Binder for Bonding Stones, Bark and Gravel on Borders, Patios and Garden Paths. Lasts up to 3 Years, Non Toxic, Ready to Use.

Product Information

hours later, the EasiHold has cured sufficiently to take careful foot traffic, and a couple of days later, it will stand up to walking, running, children, dogs and everyday pedestrian traffic. It’s even strong enough to cope with the occasional over-run by the lawn mower. Add hot water, near boiling, to the bottle and use the stirrer to mix it until an even consistency is achieved. Once the glue is fully liquid, you can spray it on the mulch you want to stay in place. Tips for Apply Glue Mulch So: flags masked-off, gravel in place, all that’s needed now is the EasiHold binder. Apply the binder:

Spraying Easihold limits penetration into the base layer of the stones. Great for achieving a larger coverage but this method won’t provide as robust a surface finish. We would recommend this application method for decorative use only.Gravel footpaths (in gardens, around paving slabs or dustbin store areas etc.) that are likely to experience regular foot traffic should be installed using only the hand mix and trowel method to achieve the best results.

When this doesn’t happen – for example in cold conditions or if you have applied too much Easihold and the stones are over saturated; the crosslinking process will not occur, and the final result will be compromised And key to this simplicity is the way that EasiHold is applied. Unlike conventional resin bound surfacing, the binder component, ie, the resin, is not pre-mixed with the selected aggregate, so there is no requirement of a forced action mixer, no need for messy cleaning solvents, no demand for specialist rakes, lutes, floats and spreaders. It’s so simple it can be used by homeowners, DIYers and gardeners with no complicated training. Zen-style garden - ideal candidate for EasiHold Note: laying loose, that is *unbound*, gravel or small aggregate over a hard base is never a good idea. Read the FAQ to find out more. This project is using, or will be using, a *bound* gravel, so laying over a form base is acceptable. Placing the Gravel: Things like Elmer’s glue will need to be reapplied when the mulch begins to shift or after extreme weather conditions. Homemade mulch glue is best used for small projects like planters. What Is Mulch Glue For?

Make sure to gather all the material and ingredients to avoid stopping, as mulch glue works best when used immediately after mixing with water. Item It would depend on your usage. A good application, on to a free draining stable base would be expected to last 24 months. We would recommend to top up annually. I did a bit of research on mulch glue before adding it to my property and found that this particular product is kid and pet-friendly, non-toxic, and can last for about a year. I was worried about water since this is near our foundation, but apparently, it’s permeable. We specifically chose pea gravel so the water could travel away from our house and to the grass, so I’m happy to hear that that will still happen! I’m not sure if it will keep weeds from coming in (they always seem to find a way), so I’ll keep you posted if they do pop on through the pea gravel.

SUDwell™ Pour on Gravel Resin provides an easy to use system that prevents the migration of loose gravel. We recommend using 2 applications of Easihold when applying by the Pour On or Spray On method for the strongest finish. Ensure that the first coat has been allowed to fully dry - and don't saturate! Spraying is more efficient because the Easihold will go further, but this method requires an airless sprayer. We recommend to use up to 1 litre per 2.8m² and 1x5 Litre Jerry can cover 12-14m² using Spray On Method per coat.Easihold can be poured on from a watering can. We recommend using a maximum of 1 litre per 1.2m² and 1x5 Litre Jerry can covers 6-8m² using Pour On Method per coat, ensuring your stones are evenly coated.