DJI Mavic 3 Intelligent Flight Battery for Mavic 3

Product Information

Charging one battery: It takes about 1 hour and 4 minutes to charge the battery by using the DJI 30W USB-C charger (1 hour and 41 minutes for Intelligent Flight Battery Plus). MORE: DJI Mini 3 Pro Battery Won’t Charge (Here’s How to Fix It) Rotate battery usage (Sequential Usage) As a general rule of thumb, commercial drone pilots retire batteries that have reached 200 cycles. This is a good practice for all drone pilots. When flying normally, the Denis Barbar Mavic 3 battery lasted 32 minutes, while in a hover test, the FlyPath Mavic 3 hovered for 36 minutes until 5% of the battery power remained.

The improved battery life of the Mavic 3 is due to its 5000 mAh capacity, giving you up to 46 minutes of flight time. Over-Discharge protection prevents the battery from discharging in excess when in idle mode (this is not enabled when the battery is being used). If you have batteries that are not up to date, when these are inserted into the Mavic 3 Pro, DJI Fly will alert you with an “inconsistent firmware” message. You will then be presented with a prompt to update the battery. Similar to the Air 3 and Mini 4 Pro, when the Mavic 3 Pro’s battery is left idle, there is an auto-discharging function that is activated: Mavic 3 Pro is C2 certified, and Mavic 3 Classic is C1 certified by the European Union Aviation Safety Agency (EASA).If there is a battery firmware update included in the current Mavic 3 Pro firmware update, this can easily be done. DJI set a benchmark for drone endurance in 2016 with the Phantom 4 and the original Mavic Pro, which each featured maximum flight times approaching 30 minutes. In the succeeding years, new drone models have slowly increased those times thanks to incremental improvements in flight technology. With Mavic 3, DJI has reshaped every element of the drone’s flight envelope and power management to enable drastically longer flight times – up to 46 minutes in ideal conditions – giving unprecedented freedom for aerial photographers to shoot dynamic scenes. The following table shows the different combinations of LED light displays that you will see when charging. Let us explain them briefly: Step 1: Make sure the DJI Mavic 3 intelligent flight battery is properly fitted in the drone’s battery space.

Step 4: Plug the DJI 65W portable charger into the nearest power outlet, making sure that it offers the appropriate input voltage (100-240 V, 50-60 Hz). Fully charge the Intelligent Flight Battery before each use. It is recommended to use the charging devices provided by DJI, such as DJI Mini 3 Series Two-Way Charging Hub, DJI 30W USB-C Charger, or other USB Power Delivery chargers. Please follow the instructions provided below to properly charge the Intelligent Flight Battery and remote controller: mAh (milliamp Hour): The storage capacity is measured in mAh. It consists of the amperes that the battery can supply per hour (if it were to be completely depleted). Insert the batteries into the charging hub, connect the USB charger or PD fast charger to the USB-C port of the charging hub, and the Status LEDs in an array blink successively.

Return Safely With Advanced RTH

If your battery does not turn on when the power button is pressed, you will need to charge the battery, whether in the hub or inserted in the Mavic 3 Pro. The charging process will deactivate hibernation mode and jumpstart the battery. Avoid flying down to 0% This helps in preventing the use of one battery, repeatedly over time over the others, thus extending each battery’s life.

DJI recommends using the DJI 65W Portable Charger or DJI Mavic 3 Car Charger when charging the batteries with the new Mavic 3 Battery Charging Hub. Before intelligent batteries were created, the old lithium polymer ones did not have LEDs to show their power status, and they required a special charger (and lots of attention) to be properly recharged. This is still a reality in the FPV drone world, so if you own one of those drones, you know for sure what I am talking about. Unlike the DJI Mini 2 Two-Way Charging Hub, the Mavic 3 Charging Hub does not offer the option to charge other devices, so you will only be able to use it to charge your drone batteries. MORE: How to Charge DJI Avata Battery (Controller & Motion Controller) Mavic 3 Pro battery won’t turn on Retiring batteries after 200 cycles ensures the safety of the drone and others nearby, as the battery could sooner or later suffer failure.As stated previously, Mavic 3 batteries take approximately 1 hour and 36 minutes to fully charge. If you own the Fly More Combo, which includes a total of three intelligent flight batteries, it should take you roughly 4 hours and 50 minutes to fully charge them all. Insert the battery to the aircraft, connect the USB-C charger or PD fast charger to the USB-C port of the aircraft, and the Battery Level LEDs in an array blink successively. MORE: DJI Mavic 3 Pro Review (I have NEVER flown a drone that I enjoyed so much) General Information

In addition, the Mavic 3 Pro Series also supports the Hasselblad Natural Colour Solution (HNCS), D-Log, D-Log M, HLG, and other color modes, which retain more image details and facilitate more efficient color grading in post-production. Now, manually setting any battery discharge function is no longer an option. This might have been done so we have one less thing to think about. Lithium Polymer (LiPo) batteries are characterized by their capacity to store a high density of energy, and their elevated discharge ratio. These two characteristics allow them to meet the high demands for instant intensity that drones require. As additional benefits, we should include that they are lightweight and that they can be produced in any geometric form.Insert the batteries into the charging hub, connect the USB-C charger or PD fast charger to the USB-C port of the charging hub, and the Status LEDs in an array blink successively. The battery can be fully charged in about 1 hours and 22 minutes when used with the DJI 18W Charger. After the battery is fully charged, the corresponding LEDs will change to solid green. The battery can be disconnected from the charging hub when charging is complete. V (Voltage): Is the nominal tension between the poles of the battery. It depends on the number of cells connected in series (for a 3S battery: 3 cells x 3.7 V = 11.1 V of nominal tension).