MikroTik rb3011uias-rm Ethernet LAN Black Router – Wired Router (Black, -30 – 70 °C, 1u, 10/100/1000Base-T (X), 3.0 (3.1 Gen 1), Ethernet (RJ-45))

Product Information

This device complies with Industry Canada's license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Mikrotikls SIA" týmto vyhlasuje, že RB3011UiAS-RM spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 2014/30/ES. Gunakan firewall dan filter rules dengan bijak untuk melindungi jaringan dan mengoptimalkan throughput. Again sorry to intrude on much more serious discussions like IPSEC performance, but could somebody help me with an answer for the above query? Mikrotikls SIA", декларира, че RB3011UiAS-RM е в съответствие със съществените изисквания и другитеприложими разпоредби на Директива 2014/30/EC.

Hierbij verklaart "Mikrotikls SIA" dat het toestel l RB2011UiAS-RM in overeenstemming is met de essentiële eisen en de andere relevante bepalin-gen van richtlijn 2014/30/EG. Käesolevaga kinnitab "Mikrotikls SIA" seadme RB3011UiAS-RM vastavust direktiivi 2014/30/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Mikrotik memiliki komunitas pengguna yang besar dan aktif, sehingga pengguna dapat dengan mudah menemukan dukungan dan sumber daya untuk mengoptimalkan penggunaan router Mikrotik RB3011UiAS-RM. Fitur Unggulan Routerboard 3 011UiAS-RMEth1 port accepts 14-30 V DC ⎓ input (at the board; higher voltage needed to compensate for power loss on long cables) from non-standard (passive) Power over Ethernet injectors. The board does not support IEEE802.3af compliant 48 V power injectors. Mikrotikls SIA" izjavlja, da je ta RB2011UiAS-RM v skladu z bistvenimi zahtevami in drugimi relevantnimi določili direktive 2014/30/ES. Eth1 port accepts 8-30 V DC input (at the board; higher voltage needed to compensate for power loss on long cables) from non-standard (passive) Power over Ethernet injectors. The board does not work with IEEE802.3af compliant 48 V power injectors. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Bagaimana cara mengakses panel LCD pada Mikrotik RB3011UiAS-RM? Jawaban: Panel LCD pada RB3011UiAS-RM dapat diakses dengan menekan tombol “Mode” pada bagian depan perangkat. The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. Bagaimana cara melakukan konfigurasi awal pada RB3011UiAS-RM? Jawaban: Konfigurasi awal pada RB3011UiAS-RM dapat dilakukan melalui interface web atau Winbox. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet. Käesolevaga kinnitab "Mikrotikls SIA" seadme RB2011UiAS-RM vastavust direktiivi 2014/30/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Mikrotikls SIA" deklaruoja, kad šis RB3011UiAS-RM atitinka esminius reikalavimus ir kitas 2014/30/EB Direktyvos nuostatas Mikrotikls SIA" týmto vyhlasuje, že RB2011UiAS-RM spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 2014/30/ES.