Watchman Sonic Oil Level Monitor

Product Information

This could mean that the gauge has been installed at an angle and not pointing straight down into the tank causing the beam to bounce around the tank and not be received correctly. The Watchman Sonic is the base level telemetrysystem we offer. This system works with a transmitter that will sitonto the top of your tank and will communicate with a 3 pin reciever plug inside your property to give you a ‘out of 10’ bar reading.

The transmitter sits on top of the tank and using ultrasonic level measurement techniques, constantly measures the level of oil in the tank. Tank mounted ultrasonic transmitter unit, compatible with the standard 32mm port fitted to modern plastic oil storage tanks. Aerocyl Unvented Heat Pump Water Cylinders Aerocyl Heat Pump & Solar Hot Water Cylinder Aerocyl Unvented Heat Pump Hot Water Cylinder Heat Pump Buffer Pre-Plumbed Indirect Hot Water Cylinders Horizontal Hot Water Cylinders CEMBox Hazardous Goods Storage Secure Storage Boxes - Hazardous Secure Cabinets - Hazardous Secure Walk-In Stores - Hazardous Secure Drum Storage - Hazardous Secure In-Vehicle Storage - Hazardous Indoor Bunded Storage Lithium-Ion Battery Cabinets Steel Indoor Bunded StorageDirect Cylinders Direct Unvented Cylinders Slimline Direct Unvented Cylinders Indirect Cylinders Indirect Unvented Slimline Indirect Unvented More Indirect Cylinders Probably the most effective and aesthetic ways to hide an oil tank is to surround it with shrubs, trees, or potted plants that can help to camouflage the tank from view. Make sure you the plants are properly maintained, as they can become a fire hazard if not cared for properly. The Watchman Sonic AdvancedIs installed using the same method as the Sensit and Sonic - The advanced unit allows you to have both options of oil level monitoring (In the property and via app).

Unscrew the green transmitter disc (or red if it is an alarm) from the top of the oil tank. On a bunded tank,the gauge is located inside the lid on the inner tank. If you have a smart oil tank gauge, you’ll be able to read amore precise tank level by simply opening the app. You can usually set up notifications that will alert you when your tank is starting to run low. Or perhaps you’re using a visual oil gauge. There are a few simple steps to re-calibrate the gauge if it stops reading the oil level of your oil tank. Pairing Transmitter and Receiver Hot Water Cylinder Accessories Immersion Heaters and Controls Kingspan Ultrasteel Hot Water Cylinders Flomaster Hot Water CylindersAdblue Solution Adblue Tanks AdBlue Titan Bluemaster Titan BlueMaster AdBlue Dispenser - Standard Titan BlueMaster AdBlue Dispenser - Advanced Titan BlueMaster AdBlue Dispenser - Pro More AdBlue Titan Bluemaster Ideal for monitoring heating oil and diesel – but also suitable for a wide range of liquids including admixtures, agricultural fuel oil, anti-freeze, biodiesel, bio heating oil, fuel oil, detergents, lubricants, waste oil and water. Range: The Kingspan Smart Monitoring Watchman Sonic Advanced is a electronic measuring oil tank gauge which monitors how much oil there is left in your oil tank and sets off an alarm in your home in the event of a sudden drop of oil levels. This helps you to ensure that you never run out of oil and are alerted if there is an attempt at theft of your oil. If the gauge inside your tank has failed or needs replacing, don't worry — it is possible to replace it if you are careful. To replace a float gauge, you will need a replacement gauge, oil lubricant, a wrench, wire and a torch. Use lubricant on the tank cap to loosen it, before turning it carefully with a wrench. Be careful not to ruin the threads. Find the end of the old float gauge arm and pull it from the oil tank with a piece of wire. You may need a torch to see what you’re doing. Remove the gauge from the gauge pipe and place the new gauge inside. Re-insert the gauge and gauge pipe into the oil tank and close the lid.