Ronseal PBPSWL5L Patio & Block Paving Seal Wet Look 5 Litre

Product Information

There are a number of different factors that are going to influence how long a wet look sealer is going to last. Generally speaking, your wet look sealer could last as long as five years. However, there are some circumstances whereby you are advised to re-apply the sealer every couple of months. This is because of the many different factors that play a role. This includes the following… The formulations of all StoneCare4U products are designed to be very straightforward. The best method of application with our patio sealer is by sponge. For larger areas, a sprayer or roller kit can be used. It is important to remember that for a consistent level of protection and continuity of finish two coats should be applied. Once the initial coat has fully dried or cured, it is too late to apply the second coat. That is the reason why the second application should be carried out pretty much as soon as the original coat is touch dry. This would generally be between 30-45 minutes later.

Seal 5L | Toolstation Thompsons Water Seal 5L | Toolstation

Deep clean the patio approximately one week before applying the sealer. This means power washing the slabs, clearing all dirt, and weeding. WE DO NOT RECOMMEND USING ON POLISHED STONE & CERAMIC GLAZED SURFACES, AS IT WON'T SOAK INTO THE SURFACE*

Buying The Right Sealant For Paving Stones

It can be used in bathrooms and kitchens with stone or slate floors, as well as on concrete, slate, patios and other porous surfaces. The finished effect looks as though the stone is damp, which brings out richer tones and colours. With an included fungicide, the Sika Patio Seal is one of the best patio sealers for protecting the patio and stopping any slippery moulds grow over the colder months. Less likely to kill or damage plants if product lands of them by accident (easily done when applying with a spray) Apply the sealer thinly and evenly with a low pressure sprayer, roller, microfibre mop, paint brush or soft cloth. Try not to leave application marks or allow the product to 'pool' or 'puddle' on the surface immediately after application. In the event of over application please ensure all excess is removed within 45 minutes of applying.

Thompsons Patio And Block Paving Seal - Wet Look Finish - 5L

Water-based sealers are mixed with a resin. This resin might be acrylic or polyurethane. Because they are water based, these sealers do not have as strong a smell as solvent-based sealers, making them more pleasant to use. For those with sensitivity to chemical smells, you do not have to worry because it does not have the common solvent smell. We love that it is ideal for treating different surfaces from Indian stove patio to concrete driveways so if you have a mixture of materials on your patio or driveways, for example, you can buy just the one sealant.

What Is The UK’s Best Patio Sealer?

Suitable for popular natural stone types including sandstone, Indian sandstone, limestone, slate, quarry tile, travertine, granite & more Only if they are applied incorrectly. In general, wet-look sealers create a film on the surface of the pavers. When applied in excess, or the sealer is not given enough time to fry between one coat and another, they in fact can become slippery. The more coats of gloss sealer that are applied, the glossier it will be. Most products recommend using two to three coats of sealer. One coat may not be enough to create a durable seal. During application, the acrylic-based sealer shouldn’t be allowed to pool, as this can lead to white spots and marks remaining visible once it dries. If spraying on an uneven surface, it can be more difficult to ensure no puddles form, and a brush may be required as well as a sprayer.